气液增压泵是什么大家都知道吗？气液增压泵是一种以压缩空气为动力，基于面积差原理，使液压油按固定增压比连续输出并用来驱动液压执行器工作的一种泵产品，是气动增压泵的一个小分类，可用于对各类液体介质进行增压稳压，例如液态二氧化碳、液压油、水、液化气、液化氢等等。
Do you know what the gas-liquid booster pump is? Pneumatic booster pump is a kind of pump product that uses compressed air as the power and based on the principle of area difference to make the hydraulic oil continuously output at a fixed pressure ratio and drive the hydraulic actuator to work. It is a small classification of pneumatic booster pump and can be used to pressurize and stabilize various liquid media, such as liquid carbon dioxide, hydraulic oil, water, liquefied gas, liquefied hydrogen, etc.
与普通液压站相比，气液增压泵有以下五点好处，如下：
Compared with ordinary hydraulic station, gas-liquid booster pump has the following five advantages:
1.?由于可较长时间保压，不额外消耗能源，故节省能源。
1.? Because it can maintain pressure for a long time without additional energy consumption, it can save energy.
2.?无油温升高，故适合夏季及闷热无通风场合使用。
2.? There is no oil temperature rise, so it is suitable for summer and hot and ventilated occasions.
3.气液增压泵不需要电源，所以适合在无电源场合。
3. The gas-liquid booster pump does not need power supply, so it is suitable for occasions without power supply.
4.体积小配置灵活，可以自带油箱，也可以安装在机床上，利用床身的空?间，节省生产面积。
4. It is small in size and flexible in configuration. It can be equipped with oil tank or installed on the machine tool to make use of the empty space of the bed? To save production area.
5.对环境不造成污染。
5. No pollution to the environment.
在接通初期，气液增压泵作为普通液体输送泵，此时循环速度快，输出液体流量大。随着输出压力在逐渐提高，活塞承受的阻力也越来越大，泵的循环速度也就越来越慢。当输出压力的反作用力与气动驱动力达到平衡时，泵将自动停下来。
At the initial stage of connection, the gas-liquid booster pump is a common liquid delivery pump. At this time, the circulation speed is fast and the output liquid flow is large. As the output pressure is gradually increasing, the resistance of the piston is also increasing, and the circulation speed of the pump is also becoming slower and slower. When the reaction force of the output pressure is balanced with the pneumatic driving force, the pump will stop automatically.
这时泵处于保压状态，不消耗任何的能量。当因泄露或其他原因引起输出压力的下降，或提供的气源压力升高时，泵会立即自动启动，调整压力，这些都得益于泵自身较低的摩擦阻力，保证了输出压力的可靠性。
At this time, the pump is in a pressure-holding state and does not consume any energy. When the output pressure decreases due to leakage or other reasons, or the pressure of the supplied air source rises, the pump will automatically start and adjust the pressure immediately, all of which benefit from the low friction resistance of the pump itself and ensure the reliability of the output pressure.
In addition, compared with gas-liquid booster cylinder, what are the advantages of gas-liquid booster pump? Since the pneumatic-hydraulic booster pump can supply oil automatically and continuously, there is no problem that the stroke of the booster cylinder limits the oil output. Come to our website for more relevant content http://www.feileisi.com Ask!
