1.实验台的台面平整、光滑,需求边沿切开规整,四边平直,无显着凹凸表象.贴面和封边部件严密、平整,不允许有脱胶、鼓泡、洼陷、压痕、表面划伤、麻点、裂痕、崩角和刀口等
1. The table is flat and smooth with regular cutting edge and straight four sides without obvious concave and convex appearance. The veneer and sealing parts are tight and flat. No degumming, bubbling, depression, indentation, surface scratches, pitting, cracks, collapse angle and knife edge are allowed.
2.各涂层平均,钢制或木制板表面平整,五色差、无拼接、无显着凹凸、驳、无划痕、无碰伤等残损.切开、钻孔和倒角无毛刺,表面的圆角、倒棱平均共同
2. On average, the surface of steel or wood panels is flat, with five-color difference, no splicing, no obvious concave and convex, no mottle, no scratch, no bruise and other damages. Cutting, drilling and chamfering have no burrs, and the rounded and chamfered surfaces are common on average.
3.柜体的每一块,其四个边有必要用热熔胶经高温高压作防水封边处置
3. It is necessary for each side of the cabinet to be treated with high-quality hot-melt adhesives as waterproof seals at high temperatures and pressures.
4.柜体的板块与板块之间的衔接,选用三合一内预埋衔接件,在放置三合一衔接件的"L"形孔洞的两头有必要注满黄胶,以加强握钉力,抗弯弧变形、防渗水、防摇摆.并一同运用滚花木质圆棒棰,带胶安稳加固衔接
4. The connection between the plate and the plate of the cabinet body should be made by using high-quality three-in-one pre-embedded joints and filling yellow glue at both ends of the L-shaped hole where the three-in-one joints are placed in order to strengthen the nail holding force, resist bending and arc deformation, prevent seepage and prevent swaying. The joints should be securely strengthened by rolling wooden round sticks with glue.
5.柜体的板块与五金配件之间的衔接,在稳固一切螺钉之前,有必要打一个小于螺钉直径和长度的孔,高压写入胶水后,再行拧入螺钉,以加强握钉力,如为螺钉与螺母衔接可在外
5. Before fixing all the screws, it is necessary to drill a hole smaller than the diameter and length of the screw. After high pressure writing into glue, the screw is screwed in to strengthen the grip force. If the screw is connected with the nut, it can be outside.
6.一切柜体衔接坚固,无松动表象;表面平整无显着变形;显露有些无毛刺及尖利矛头
6. All cabinets are firmly connected and free from loosening; their surfaces are smooth and without significant deformation; some of them are burr-free and sharp spearheads are exposed.
7.零部件无开裂或劈裂表象,不会呈现影响运用1.功用的磨损变形表象,可动有些(例如可调式地脚、活动隔板等)活动灵敏,用手掀压不会呈现永世形变形或松动,抗压才干契合实验台的需求
7. Parts without cracking or splitting will not show the wear and deformation appearance that affects the use of 1. Functions. Movable parts (such as adjustable foot, movable partition, etc.) are sensitive to movement. Hand-lifting will not show permanent deformation or loosening. Compressive ability meets the needs of the test-bed.
8.单相三线电源插座与两线插头相兼容
8. Single-phase three-wire power socket compatible with two-wire plug
9.一切水、电、气路需求平安、适用,并躲藏式安装
9. All water, electricity and gas circuits need safe, applicable and hiding installation.
10.产物尺度需求:长、宽、高过失点≤3mm;邻边笔直度:台面对角线、构造对角线1000mm≤3mm; 2000mm≤4mm; 3000mm≤
10. Product size requirement: length, width and high fault point < 3mm; adjacent edge straightness: mesa diagonal line, structural diagonal line 1000mm < 3mm; 2000mm < 4mm; 3000mm < 3mm
This is the content of the gas booster pump http://www.feileisi.com. Thank you for checking the information content of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
