要使您的
气液增压泵处于良好的工作状态，您应该注意一些什么事项呢？这一问题希望您能重视起来，下面小编为您讲解四个方面的要点。
To keep your gas-liquid booster pump in good working condition, what matters should you pay attention to? I hope you can pay attention to this problem. Here are four key points to explain.
1.气液增压泵的驱动气体的压力和流量。
1. Pressure and flow of driving gas of gas-liquid booster pump.
在连续工作时，所有的气液增压泵和动力单元使用的驱动气压不超过0.69Mpa，在间歇工作时可达到1.03Mpa。
During continuous operation, the driving air pressure used by all gas-liquid booster pumps and power units shall not exceed 0.69 Mpa, and can reach 1.03 Mpa during intermittent operation.
2.气液增压泵的工作压力和流量。
2. Working pressure and flow of gas-liquid booster pump.
所有的气液增压泵和动力单元的工作压力参照驱动气压为0.48Mpa时泵输出压力和流量。如果泵的大输出压力大于所需的工作压力，这就要考虑做好措施以免发生意外。
The working pressure of all gas-liquid booster pumps and power units shall refer to the pump output pressure and flow when the driving air pressure is 0.48Mpa. If the large output pressure of the pump is greater than the required working pressure, safety measures should be taken to avoid accidents.
3.气液增压泵的输送液体介质。
3. Delivery liquid medium of gas-liquid booster pump.
气液增压泵输送的液体介质是选型中着重考虑的部分。液压部分的材质和液压密封圈是由输送的液体介质所决定的。气液增压泵可用油、水和大多数液体介质。标准泵的主要液压密封圈是丁橡胶和聚氨酯，单向阀座采用特氟龙密封。其它密封材料包括碳氟化合物和亚乙基丙烯，这些密封材料主要用于输送的特殊介质。玖容的气液增压泵与其它的气液增压泵比较，玖容气液增压泵可完成同样的工作，但其零件及密封少，维护更简单。
The liquid medium delivered by the gas-liquid booster pump is a key part of the selection. The material of the hydraulic part and the hydraulic seal ring are determined by the liquid medium conveyed. The gas-liquid booster pump can use oil, water and most liquid media. The main hydraulic sealing rings of the standard pump are polybutadiene rubber and polyurethane, and the one-way valve seat is sealed with Teflon. Other sealing materials include fluorocarbon and ethylidene propylene, which are mainly used for special media. Compared with other gas-liquid booster pumps, Jiurong gas-liquid booster pump can complete the same work, but it has fewer parts and seals and is easier to maintain.
4.气液增压泵的体积和重量。
4. Volume and weight of gas-liquid booster pump.
对于某些的应用，泵和动力单元的外形尺寸和重量也要考虑。
For some applications, the overall dimensions and weight of pumps and power units should also be considered.
How to keep the gas-liquid booster pump in good working condition? The above is the answer to the question. You can take a look at it as a reference. It is recommended that you understand the problem and check and maintain items during use, and pay attention to us http://www.feileisi.com Learn more!
