增压泵原理是利用大面积活塞的低气压产生小面积活塞的高液压。工业领域用于机床卡盘的卡紧，蓄能器充气，高压瓶充气，降低压气体转换成高压气体等。凡是气源压力不够高，无论是机械或测试装置，均可采用增压泵。
The principle of booster pump is to use the low pressure of large area piston to generate high hydraulic pressure of small area piston. In the industrial field, it is used for clamping the chuck of machine tools, inflating the accumulator, inflating the high-pressure bottle, and converting the pressure reducing gas into high-pressure gas. Booster pump can be used for any air source with insufficient pressure, whether mechanical or testing device.
采用气体驱动，无电弧及火花，完全用于有易燃、易爆的液体或气体场所。无论何种原因造成保压回路压力下降，增压泵将自动启动，补充泄漏压力，保持回路压力恒定。压缩空气、氮气、水蒸汽、天然气等均可做作为泵的驱动气源。
It is driven by gas, without electric arc and spark, and is completely used in places with flammable and explosive liquids or gases. No matter what causes the pressure drop of the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and keep the circuit pressure constant. Compressed air, nitrogen, steam and natural gas can be used as the driving gas source of the pump.
Gas liquid booster pump
直到再次达到压力平衡后自动停止采用单气控非平衡气体分配阀来实现泵的自动往复运动泵体气驱部分采用铝合金制造。接液部分根据介质不同选用碳钢或不锈钢，泵的全套密封件均为进口产品，从而保证了气液增压泵的性能。
The gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel shall be selected for the liquid connection part according to different media. The full set of seals of the pump are imported products, thus ensuring the performance of the gas-liquid booster pump.
空气增压泵
Air booster pump
空气增压泵原理是利用大面积活塞的低气压产生小面积活塞的高液压。空气增压泵使用于原空压系统要提高压力的工作环境中，能够将工作系统的空气压力提高到2-5倍，仅需要将工作系统内压缩空气作为气源即可。该泵适合单气源增压。无需电源（可使用于需防爆的领域）。在泵的压力范围内，调节调节阀从而调节进气压力，输出液压相应相应得到无极调整。
The principle of the air booster pump is to use the low air pressure of the large area piston to generate the high hydraulic pressure of the small area piston. The air booster pump is used in the working environment where the pressure of the original air pressure system needs to be increased. It can increase the air pressure of the working system to 2-5 times. Only the compressed air in the working system needs to be used as the air source. The pump is suitable for single air source pressurization. No power supply is required (it can be used in areas requiring explosion protection). Within the pressure range of the pump, adjust the regulating valve to adjust the inlet pressure, and the output hydraulic pressure is accordingly adjusted steplessly.
氯气增压泵
Chlorine booster pump
氯气增压泵工作压力范围大，选用不同型号的泵可获得不同的压力区域，调节输入气压输出气压相应得到调整。可达到高的压力，气体90Mpa。流量范围广，对所有型号泵仅0.1Kg气压就能平稳工作，此时获得小的流量，调节进气量后可得到不同的流量。
The working pressure range of chlorine booster pump is large. Different types of pumps can be selected to obtain different pressure areas, and the input air pressure and output air pressure can be adjusted accordingly. It can reach a high pressure of 90Mpa. The flow range is wide. For all types of pumps, only 0.1Kg air pressure can work smoothly. At this time, small flow can be obtained. After adjusting the intake air volume, different flows can be obtained.
易于控制，从简单的手动控制到完全的自动控制均可满足要求。自动重新启动，无论何种原因造成保压回路压力下降，将自动重新启动，补充泄漏压力，保持回路压力恒定。操作，采用气体驱动，无电弧及火花，可在危险场合使用。
Easy to control, from simple manual control to complete automatic control can meet the requirements. Automatic restart. No matter what causes the pressure drop of the pressure maintaining circuit, it will automatically restart to supplement the leakage pressure and keep the circuit pressure constant. Safe operation, gas driven, no arc and spark, can be used in dangerous places.
This is the end of the basic question about the use principle and three types of booster pump. If you have any questions about this, please come to our website http://www.feileisi.com Get in touch!
