气液增压泵是由压缩空气来驱动，增压液体，又称气动液体增压泵，可以将液体增压到640Mpa的压力。压力无极可调，方便控制。保压的时候不消耗能量。便于携带，可以用于防爆领域。想要了解它的更多知识吗？那就跟随小编一起来了解一下吧！
The gas-liquid booster pump is driven by compressed air to pressurize the liquid, also known as pneumatic liquid booster pump, which can pressurize the liquid to a pressure of 640mpa. The pressure is infinitely adjustable and easy to control. No energy is consumed during pressure maintaining. It is easy to carry and can be used in explosion-proof field. Want to know more about it? Then follow Xiaobian to learn about it!
气液增压泵工作原理类似于压力增压器，对大径空气驱动活塞施加一个很低的压力，当此压力作用于一个小面积活塞上时，产生一个高压。通过一个二位五通气控换向阀，增压泵能够实现连续运行。由单向阀控制的高压柱塞不断的将液体排出，增压泵的出口压力大小与空气驱动压力有关。
The working principle of the gas-liquid booster pump is similar to that of the pressure booster, which applies a very low pressure to the large-diameter air driven piston. When this pressure acts on a small area piston, a high pressure will be generated. Through a two position five ventilation control reversing valve, the booster pump can realize continuous operation. The high-pressure plunger controlled by the one-way valve continuously discharges the liquid. The outlet pressure of the booster pump is related to the air driving pressure.
当驱动部分和输出液体部分之间的压力达到平衡时，增压泵会停止运行，不再消耗空气。当输出压力下降或空气驱动压力增加时，增压泵会自动启动运行，直到再次达到压力平衡后自动停止。
When the pressure between the drive part and the output liquid part reaches equilibrium, the booster pump will stop running and no longer consume air. When the output pressure drops or the air drive pressure increases, the booster pump will automatically start and run until the pressure balance is reached again and then stop automatically.
采用单气控非平衡气体分配阀来实现泵的自动往复运动，泵体气驱部分采用铝合金制造。接液部分根据介质不同选用碳钢或不锈钢，泵的全套密封件均为进口产品，从而保证了气液增压泵的性能。
The single gas control non-equilibrium gas distribution valve is used to realize the automatic reciprocating movement of the pump. The gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel is selected for the liquid receiving part according to different media. The whole set of seals of the pump are imported high-quality products, thus ensuring the performance of the gas-liquid booster pump.
特点
characteristic
1、输出压力高，大输出压力可高达400Mpa。
1. High output pressure, large output pressure can be as high as 400MPa.
2、使用范围广，工作介质可为液压油、水及大部分化学腐蚀性（相应的耐腐蚀材质密封）液体，并且可靠性高，免维护和寿命长。
2. It can be used in a wide range. The working medium can be hydraulic oil, water and most of the chemically corrosive (corresponding corrosion-resistant materials are sealed) liquids. It has high reliability, maintenance free and long service life.
3、易于调节，在泵的压力范围内，调节调压阀从而调节输入气压，输出液压相应得到无级调整。
3. It is easy to adjust. Within the pressure range of the pump, adjust the pressure regulating valve to adjust the input air pressure, and the output hydraulic pressure can be adjusted steplessly accordingly.
4、自动保压，无论何种原因造成保压回路压力下降，泵将自动启动，补充泄漏压力，保持回路压力稳定。
4. Automatic pressure maintaining: no matter what causes the pressure of the pressure maintaining circuit to drop, the pump will start automatically to supplement the leakage pressure and keep the circuit pressure stable.
5、操作，采用气体驱动，无电弧及火花，可在危险场所使用。
5. Safe operation, gas driven, no arc and spark, can be used in dangerous places.
气液增压泵的应用
Application of gas liquid booster pump
航空工业
aviation industry
1、静态及动态测试设备
1. Static and dynamic test equipment
2、起落架负载、冲击试验
2. Landing gear load and impact test
3、飞机支架系统
3. Aircraft support system
4、液压服务小车
4. Hydraulic service trolley
5、胎裂(更换轮胎)
5. Tire crack (replace tire)
6、拉伸成形
6. Stretch forming
7、阀门测试时夹紧。等等。
7. Clamp the valve during test. wait.
柴油机
Diesel engine
1、灌注燃料
1. Filling fuel
2、喷油嘴测试
2. Fuel injector test
汽车工业
automotive industry
1、制动系统测试
1. Brake system test
2、倾斜驾驶室
2. Tilt cab
3、支架系统
3. Support system
4、拖车固定
4. Trailer fixing
5、操作离合器。等等。
5. Operate the clutch. wait.
工业机器
Industrial machinery
1、滚动粉碎机(保持压力)
1. Rolling mill (holding pressure)
2、熔炉门的液压操作
2. Hydraulic operation of furnace door
3、低压接头的冷压成形
3. Cold press forming of low pressure joint
4、等压机。等等。
4. Wait for the press. wait.
隧道工程
Tunnel works
1、隧道平台和支架
1. Tunnel platform and support
石油化学工业
Petrochemical Industry
1、高压气体系统和仪器测试
1. High pressure gas system and instrument test
2、泵送催化剂。等等。
2. Pump catalyst. wait.
油田工业
Oilfield Industry
1、液压蓄能器冲天防喷装置（气体增压泵可用于向蓄能器充氮）
1. Hydraulic accumulator blowout preventer (gas booster pump can be used to charge nitrogen to the accumulator)
2、从芯桶中移走芯棒
2. Remove the core rod from the core barrel
3、从插入式泵中移走柱塞
3. Remove the plunger from the plug-in pump
4、作独立的液压动力
4. Independent hydraulic power
5、取代手动泵。等等。
5. Replace the manual pump. wait.
机床工业
Machine tool industry
1、磨床、钻孔机、齿轮切割机、焊接装置的夹紧
1. Clamping of grinding machine, drilling machine, gear cutting machine and welding device
2、特氟龙、火药等的压制。等等。
2. Teflon, gunpowder, etc. wait.
To learn more about the gas-liquid booster pump here, we will have a brief understanding from two or three aspects. Of course, if you do not understand anything about this, you can come to our website at any time http://www.feileisi.com Inquired.
