用户对于空气增压泵的认可与关注，一来是由于市场的推广普及，二来的确是“气动控制”的空气增压泵效果确实明显，实实在在有着的效果。
Users' recognition and attention to the air booster pump is due to the popularization of the market and the "pneumatic control" air booster pump, which has an obvious effect of energy saving.
气动空气增压阀（也称空气增压泵、空气增压机、空气增压器）市场发展是从开始的活塞空气压缩机，到普通空压机，再到现在的气动空气增压机和双作用气体增压机。
The market development of pneumatic air booster valve (also known as air booster pump, air booster and air supercharger) is from piston air compressor to ordinary air compressor, and then to pneumatic air supercharger and double acting gas supercharger.
说明气动增压机行业是在不断的创新与发展的。新产品的出现，即是技术的进步，也是市场发展的需要。
It shows that the pneumatic booster industry is constantly innovating and developing. The emergence of new products is not only the progress of technology, but also the need of market development.
冷空气进入压缩空气增压阀之后，遇到泵体背部摩擦的热量高温会产生大量的水蒸汽，这样就会加大空气增压泵后处理水蒸汽过滤的负担，所以需时常排放后处理设备里的水份。
After the cold air enters the compressed air booster valve, it will encounter the heat of friction at the back of the pump body, and a large amount of water vapor will be generated at high temperature, which will increase the burden of post-treatment steam filtration of the air booster pump, so it is necessary to discharge the water in the post-treatment equipment from time to time.
压缩空气通过管道进入到生产区域被用户使用，而这些管道有的被埋在地下，有的走明管在空中。
Compressed air enters the production area through pipelines and is used by users. Some of these pipelines are buried underground and some are exposed in the air.
在寒冷的天气中走明管，可能会因为低温导致一部分湿气产生，有的甚会因为湿气的增加，给用户的正常使用带来一定的影响。
In cold weather, when the pipe is exposed, some moisture may be generated due to low temperature, and some may even have a certain impact on the normal use of users due to the increase of moisture.
比如，激光切割机行业，若压缩空气里含油含水过高会影响到切割过程中的精度。在矿山行业，潮湿的压缩空气增压泵，可能并不会影响到气动工具的正常使用，但会影响到气动工具作业时力度。
For example, in the laser cutting machine industry, if the oil and water content in the compressed air is too high, it will affect the accuracy of the cutting process. In the mining industry, wet compressed air booster pump may not affect the normal use of pneumatic tools, but will affect the strength of pneumatic tools during operation.
注：冬季停机后一定要注意放空所有气体、排污、放水，放空各种管道及气包内的水、气、油，因冬季机组工作时，温度比较高，一停机后因外界温度较低，空气冷却后会有大量冷凝水产生，存在各种控制管道中，容易使控制管路堵塞、涨裂等隐患。
Note: after shutdown in winter, pay attention to vent all gas, sewage and water, and vent the water, gas and oil in various pipelines and air bags. Because the temperature of the unit is relatively high in winter, a large amount of condensate will be generated after air cooling due to low external temperature after shutdown, which is stored in various control pipelines, which is easy to cause hidden dangers such as blockage, expansion and crack of control pipelines.
