1、速度快：
1. Fast:
气液增压缸动作速度较液压传动快，且较气压传动稳定。
The action speed of gas-liquid booster cylinder is faster than that of hydraulic transmission and is more stable than that of pneumatic transmission.
2、出力大：
2. High output:
在相同途径条件下，气液增压缸可达油压机之高出力（1~200吨）,非纯气压系统可达到。
In the same way, the gas-liquid booster cylinder can reach the high output of the hydraulic press (1 ~ 200 tons), and the non pure air pressure system can achieve.
3、不损模：
3. No loss mode:
的“软到位冲压技术，预压行程快速且以极小的力度接触工件表面，整体提高了加工品质和模具使用寿命。
The advanced & quo; soft in place stamping technology can make the pre pressing stroke fast and contact the workpiece surface with minimal force, thus improving the processing quality and die service life.
4、零泄漏：
4. Zero leakage:
能量转换方便，可以做到零內漏不必担心环境污染。
Energy conversion is convenient, can achieve zero internal leakage, do not have to worry about environmental pollution.
5、低故障：
5. Low fault:
纯气源驱动（仅需4~7公斤气源压力），无油压系统温升之困扰。
Driven by pure air source (only 4 ~ 7 kg air source pressure), there is no problem of temperature rise of oil pressure system.
6、：
6. Energy saving and environmental protection:
纯气源驱动，零污染，耗气量仅为气缸的16.3%，耗电/使用成本比油压缸低（实际能耗相当于油压系统10%－30%）。
Driven by pure air source, zero pollution, the air consumption is only 16.3% of that of the cylinder, and the power consumption / use cost is lower than that of the hydraulic cylinder (the actual energy consumption is equivalent to 10% - 30% of the oil pressure system).
7、空间小：
7. Small space:
与普通气缸及液压站相比，气液增压缸占用空间面积可小于50%以上。
Compared with ordinary cylinder and hydraulic station, the space occupied by gas-liquid booster cylinder can be less than 50%.
8、易安装：
8. Easy to install:
法兰板等安装固定，有多种安装方式（正装、倒装、水平安装及任意角度安装等），根据不同工作场合可在任意角度和位置安装。
Flange plate is installed and fixed. There are various installation methods (front installation, inverted installation, horizontal installation and installation at any angle). According to different working situations, it can be installed at any angle and position.
10、易控制：
10. Easy to control:
只需要一个或两个电磁阀控制，可实现手动、脚踏及全自动控制等。
Only one or two solenoid valves are needed to control, which can realize manual, pedal and automatic control.
11、易维护：
11. Easy to maintain:
产品结构简单紧凑，较油压系统等维护简便。
The structure of the product is simple and compact, which is easier to maintain than the oil pressure system.
12、性价比高：
12. High cost performance:
设备单价较油压系统低廉。
The unit price of the equipment is lower than that of the oil pressure system.
13、寿命长：
13. Long life:
正常使用的情况下，平均使用寿命可达5年以上.
Under normal use, the average service life can reach more than 5 years
With the gas booster pump above the small summary, hope to help the majority of customers, if there is anything you do not understand or seek help, please click our website: http://www.feileisi.com Or call consultation, we will try our best to solve it for you
