气液增压泵选用内置式单气控两位四通阀实现泵的主动往复运动，该系列产品为我公司消化吸收国外同类型产品后依照我国规范规划制作的产品。气驱部分悉数选用铝合金并氧化处理，泵头根据介质不同可选用碳钢或不锈钢。
The gas-liquid booster pump uses the built in single pneumatic control two position four way valve to realize the pump's active reciprocating motion. This series of products is designed and manufactured by our company after digestion and absorption of similar products abroad. Aluminum alloy and oxidation treatment are used in the gas drive part, and carbon steel or stainless steel can be selected according to the different medium.
该系列产品的驱动活塞直径为80mm，运用气压8bar。
The drive piston diameter of the series is 80mm, and air pressure is 8bar.
高压气动液体增压泵主要功能及特点:
The main functions and characteristics of high pressure pneumatic liquid supercharging pump are:
◆输出压力高：较大液体输出压力可高达300MPa。
The high output pressure: the maximum output pressure of the liquid can be as high as 300MPa.
◆适用规模广：作业介质可为液压油，水及大部分化学无腐蚀性液体，并且可靠性高。
The scope of application is wide: working medium for hydraulic oil, water and most chemical non corrosive liquids, and high reliability.
◆输出规模广：对一切类型泵只需较小气压就能平稳作业，调理进气压力可获得不同的流量及压力。
The output of all types of wide scale pump only needs smaller air pressure can work smoothly, conditioning intake pressure can obtain the flow and pressure of different.
◆运用灵敏：选用不同的类型的泵，可获得不同的压力区域。
The use of sensitive: choose different types of pumps, available in different pressure regions.
◆主动保压：不管何种原形成保压回路压力下降，赛思特泵将主动发动，弥补泄漏压力，坚持回路压力恒定。
The active pressure: no matter what the original formation pressure holding circuit pressure drop ceist pump will take the initiative to start, make up the pressure, insist on constant pressure circuit.
◆操作：选用气体驱动，无电弧及火花，可在风险场所运用。
The safe operation: the gas driven, no arc and spark in place using risk.
